ICU Mechanical Bed

    ICU Mechanical Bed

    ICU Mechanical Bed (NST-01)
    Purpose: ICU Bed are required to be used in Intensive Care Unit for comfort of Patient & facilitate comfortable transfer to & from Emergency/ OT/ Ward etc. & also to carry out point of care process including Radio-logical procedure at bed side .
    ICU Bed Actuator type : ------ Mechanical (Handle Operated)
    Function mechanism type for CAM of bed : ------ Super Smooth Crank Screw Mechanism
    Functioning mechanism type for Height Control : ------ Super Smooth Crank Screw Mechanism
    Bed top type : ------ Perforated
    X-Ray translucent facility : ------ Yes/No
    Side panel type : ------ Collapsible
    Number of Side panel : ------ 2
    Head & Foot panel /Board shape : ------ B-type / C-type / D-type
    Head & foot Panel type : ------ Detachable
    Number of hooks provided in IV rod : ------ 2
    Rectangular telescopic tube box housing (for T/Spring) : ------ Yes/No
    Degree Angle & Height indicator : ------ No
    X-Ray film holder used from : ------ One Side
    Power of motor in HP : ------ NA
    Availability of patient constraint belt provided both side : ------ No
    Number of caster to which braking system provided : ------ 2
    Safe working load capacity of ICU bed in kg : ------ 150
    Mattress provided with ICU bed : ------ Yes
    ICU mattress must X-ray translucent : ------ Yes
    Mattress made of High resilient & bio-density foam : ------ Yes
    Mattress type : ------ Translucent to allow radiography
    Mattress design : ------ cube cut design promote air flow
    ICU Bed Mattress material : ------ PU Foam
    Therapeutic Weight limit for mattress in kg : ------ 150-175 Kg
    Power Supply : ------ N/A for mechanical operated
    Facility of Resettable overcurrent breaker : ------ N/A for handle operated
    Warranty : ------ 3 Years

    Standard Parameter Conformity to standard for safety &
    electromagnetic compatibility
     : ------ IEC60601-1-2:2001 or IS13450

    Dimensional & Material Parameter
    Material for the frame of bed : ------ MS
    Material for side railing/ Side Safety guard : ------ SS
    Material for Head & Foot Panel/Board : ------ ABS Plastic
    Material for Bed Top Section : ------ MS
    Material of wheels : ------ Polyester
    Material for IV rod with chromium plated: ------ SS
    Maximum Adjustable Back Rest Angle in Degree : ------ 0-70 degree
    Maximum Adjustable Knee Rest Angle in Degree : ------ 0-40 degree
    Maximum Trendelenburg Angle in Degree (±2d) : ------ 15 degree
    Maximum Reverse Trendelenburg Angle in Degree (± 2d) : ------ 15 degree
    Mean coil diameter of tension spring for CWM : ------ 40, N/A for Super Smooth Crank Screw Mechanism
    Spring coil diameter used in counter weight mechanism : ------ 6, N/A for Super Smooth Crank Screw Mechanism
    Clearance between Bed Base frame and Floor surface : ------ 150 mm
    Length of bed in mm with 2% tolerance : ------ 2100-2200 mm
    Width of bed in mm with 2% tolerance : ------ 1000-1050 mm

    Additional Parameters
    Spares Accessories of ICU Bed like Mainframe, Bed Ends, detachable Collapsible side rails supplied, IV Rods, Mattress : ------ No, Supplied on additional charges only

    Electric Shock Protection level : ------ NA for handle operated

    Leave a Reply

    Your email address will not be published. Required fields are marked *